Loading Please Wait...

Our Products

DentCare Anti-Snoring Device

DentCare Anti-Snoring Device

  • DentCare Anti-Snoring Device

    Do you snore....?

    Why would anybody SNORE anymore?

    For those ashamed of the 'loud sound' that they make when asleep, Dentcare offers the perfect solution in Silensor-sl. The device is a success in almost all cases since the noise involved in snoring is caused by constriction of the airways. It has a compact design and does not inhibit breathing through the mouth.

    Snoring is a serious health hazard especially in older people and can even reduce life expectancy. Risk of car accidents and industrial accidents involving employees with monotonous jobs are higher for individuals who are found to be tired due to bad sleep resulting from snoring.

    That's when the Silensor-sl is significant.

    With the Silensor-sl, the lower jaw and the tongue are held in a protrusive (forward) position which opens up the airways stopping the snoring sounds when asleep. This stops the snoring sounds, instead you get a good night's sleep and you wake up raring to go.

    However, in patients with severe corpulence, a good success of treating is doubtful. The effectiveness will be reduced at BMI (body-mass-index) of over 30

    Snoring:

    Snoring as we all know is the sound caused while sleeping and is caused by the obstruction of airflow through the passageway during breathing when asleep. The decreasing muscle tone during the sleep causes a narrowing of the upper respiratory tract, either from poor sleep posture or abnormalities of the soft tissues in your throat. This narrowing accelerates the respiratory airflow, thereby various structures in the area of the upper respiratory tract start to vibrate and cause the snoring noise.

    It can be a major cause for sleep disturbances resulting in stress, lack of energy, poor concentration and mood swings which can even lead to high blood pressure and heart problems in the long run.  

    The apnea, the respiratory arrest during sleep:

    Sleep apnea is, at a certain level of severity, a serious disease that may cause not only sleepiness during the day but also serious systemic diseases.

    The apnea is a total respiratory stop. The obstructive apnea is a complete occlusion of the respiratory tract whereas in case of the central apnea the central respiratory reflex arrests. The hypopnea is a reduction of the respiratory flow by more than 50%.

    An obstructive apnea is characterized by an interruption of the very noisy snoring (rhonchopathy).

    The central apnea, however, has no external signs.

    Intense sweating during the night, frequent nocturnal urination and a dry mouth can be indications for an Obstructive Sleep Apnea (OSA) and an Upper Airway Resistance Syndrome (UARS).

              

    The effectiveness of the Silensor-sl:

    The Silensor-sl consists of one splint for the upper jaw and one for the lower jaw. The lower jaw is either held in a predetermined position or advanced by 2 connectors that are fixed laterally to the splint. The Silensor-sl thus counteracts the narrowing of the respiratory tracts. The velocity of the inspired air decreases and so do noise-generating vibrations of soft tissues. With the Silensor-sl jaw movements are possible but no falling back of the lower jaw. With this function the Silensor-sl is a comfortable and at the same time effective snoreguard.

  • Terms and Conditions

    • Warranty regarding extension, retention, occlusion, contact etc. is only on the basis of the given model.
    • All repetitions and corrections should be informed within 7 days and will be accepted only with fresh models along with initially supplied model, work and warranty card.
    • To claim warranty for DentCare prostheses, the patient should consult the same doctor or clinic, not the Lab directly Repetitions will be charged at 50% of the actual rate of the work and additional tax, if any. Patient cannot claim warranty for any sort of prostheses upgradation.
    • Products described without warranty in the price list will not have any warranty.
    • By delivering DentCare prostheses to the patient the dentist approves and takes responsibility that all clinical requirements are fulfilled.
    • Payment through at par cheque / DD should be made against delivery.
    • Ensure giving temporary crown / bridge, after tooth preparation. We won't be responsible for problems in insertion, if temporary crown or bridge is not given.
    • An order placed, cannot be withdrawn.
    • We need 7 working days to complete a work excluding Second Saturdays, Sundays and other Holidays.
    • Prices are inclusive of GST.
    • Prices are subject to change without prior information.
    • All legal disputes shall be within Muvattupuzha jurisdiction.

    URGENT ORDERS

    Urgent orders will be charged 10% extra. The fabrication time depends on prosthesis type and number of units. (For more details please refer time schedule)

    SUGGESTIONS

    • The proximal margins of the abutments should be parallel or slightly tapering towards occlusal surface. Eliminate undercuts to the maximum. Round all corners.
    • "We always prefer perfect rubber base impression". Don’t pour die stone type IV immediately to the rubber base impression. Pour only after 1 hour.
    • Don't allow the alginate impression to get dried. Pour Die Stone type IV immediately. If the model thus prepared is found defective (air bubble, broken stump etc.), discard it, and take a new impression rather than trying to produce a second model from the old alginate impression. We need upper and lower full arch Die Stone type IV models to check the occlusion correctly.
    • Provide bite registration in Silicone putty (not in wax), if necessary.
    • The shade will be perfect only if the labial and occlusal clearance is 2mm and the shade should be taken in natural light.
    • VITA classical or VITA 3D master or Ivoclar A-D shade number should be given for ceramic shade selection.
    • Avoid grinding the metal prosthesis at the time of metal trial.
    • This may lead to contamination of metal and ceramic chip- off. Always provide pre-operative model for anterior cases, if the patient is satisfied with the temporary crown/ bridge, kindly provide a model of that, which will help us in imitating the shape and arrangement.
    • Pre-operative model will also be useful in some cases.

All Products

DentCare is an Indian company with international standards.

  • DentCare Zirconia

  • DentCare Luminers

  • PEEK

  • DMLS CAD/CAM PFM

  • Light Cure Composite

  • Valplast

  • Implant C & B

  • DentCare Hybrid Implant Bridge

  • Implant-supported Overdentures

  • Acrylic Full Denture

  • Digital Smile Design

  • Lava 3M ESPE

  • Cercon (Degudant)

  • IPS e.max

  • Zenostar

  • Procera (Nobel Biocare)

  • DentCare Flex

  • Biofunctional Prosthetic System(BPS) Dentures

  • Precision Attachment

  • CoCr&Ti Cast Partial Dentures

  • Hybrid Denture

  • Surgical Drill Guide

  • DentCare Nova

  • Precious Alloy-Full Metal Crowns

  • DentCare Anti-Snoring Device

  • DentCare Mouth-Guard Triple

  • Night Guard

  • Bio Dentaplast

  • e.max CAD