Loading Please Wait...

Our Products

Implant-supported Overdentures

Implant-supported Overdentures

  • Implant-supported Overdentures

    Implant-supported Overdentures are offered in various material options namely

    • Titanium (Milled)
    • Titanium (Cast)
    • Direct Metal Laser Sintered (DMLS) in Cobalt-Chromium
    • Cobalt-Chromium Cast

     

  • Benefits

    • Minimum number of implants required is at least 2 per jaw.
    • Removable for easy care.
    • Structured to give full implant-supported function.
    • Restores quality of life in a cost effective and timely manner.
    • Preserves the bone and prevents further deterioration of facial structure.
    • Prevents health problems that would normally occur with complete tooth loss.

     

  • Terms and Conditions

    • Warranty regarding extension, retention, occlusion, contact etc. is only on the basis of the given model.
    • All repetitions and corrections should be informed within 7 days and will be accepted only with fresh models along with initially supplied model, work and warranty card.
    • To claim warranty for DentCare prostheses, the patient should consult the same doctor or clinic, not the Lab directly Repetitions will be charged at 50% of the actual rate of the work and additional tax, if any. Patient cannot claim warranty for any sort of prostheses upgradation.
    • Products described without warranty in the price list will not have any warranty.
    • By delivering DentCare prostheses to the patient the dentist approves and takes responsibility that all clinical requirements are fulfilled.
    • Payment through at par cheque / DD should be made against delivery.
    • Ensure giving temporary crown / bridge, after tooth preparation. We won't be responsible for problems in insertion, if temporary crown or bridge is not given.
    • An order placed, cannot be withdrawn.
    • We need 7 working days to complete a work excluding Second Saturdays, Sundays and other Holidays.
    • Prices are inclusive of GST.
    • Prices are subject to change without prior information.
    • All legal disputes shall be within Muvattupuzha jurisdiction.

    URGENT ORDERS

    Urgent orders will be charged 10% extra. The fabrication time depends on prosthesis type and number of units. (For more details please refer time schedule)

    SUGGESTIONS

    • The proximal margins of the abutments should be parallel or slightly tapering towards occlusal surface. Eliminate undercuts to the maximum. Round all corners.
    • "We always prefer perfect rubber base impression". Don’t pour die stone type IV immediately to the rubber base impression. Pour only after 1 hour.
    • Don't allow the alginate impression to get dried. Pour Die Stone type IV immediately. If the model thus prepared is found defective (air bubble, broken stump etc.), discard it, and take a new impression rather than trying to produce a second model from the old alginate impression. We need upper and lower full arch Die Stone type IV models to check the occlusion correctly.
    • Provide bite registration in Silicone putty (not in wax), if necessary.
    • The shade will be perfect only if the labial and occlusal clearance is 2mm and the shade should be taken in natural light.
    • VITA classical or VITA 3D master or Ivoclar A-D shade number should be given for ceramic shade selection.
    • Avoid grinding the metal prosthesis at the time of metal trial.
    • This may lead to contamination of metal and ceramic chip- off. Always provide pre-operative model for anterior cases, if the patient is satisfied with the temporary crown/ bridge, kindly provide a model of that, which will help us in imitating the shape and arrangement.
    • Pre-operative model will also be useful in some cases.

All Products

DentCare is an Indian company with international standards.

  • DentCare Zirconia

  • DentCare Luminers

  • PEEK

  • DMLS CAD/CAM PFM

  • Light Cure Composite

  • Valplast

  • Implant C & B

  • DentCare Hybrid Implant Bridge

  • Implant-supported Overdentures

  • Acrylic Full Denture

  • Digital Smile Design

  • Lava 3M ESPE

  • Cercon (Degudant)

  • IPS e.max

  • Zenostar

  • Procera (Nobel Biocare)

  • DentCare Flex

  • Biofunctional Prosthetic System(BPS) Dentures

  • Precision Attachment

  • CoCr&Ti Cast Partial Dentures

  • Hybrid Denture

  • Surgical Drill Guide

  • DentCare Nova

  • Precious Alloy-Full Metal Crowns

  • DentCare Anti-Snoring Device

  • DentCare Mouth-Guard Triple

  • Night Guard

  • Bio Dentaplast

  • e.max CAD