Loading Please Wait...

Our Products

Procera (Nobel Biocare)
Many in one

Procera (Nobel Biocare)

  • Procera (Nobel Biocare)

    Procera-patented sintering process ensures each coping is robust and gives the coping a semi-translucent colour. It utilises latest CAD/CAM technology to fabricate metal-free restorations that appear natural and ensures perfect function in posterior region. Procera Laminate is one of the strongest laminate, and has excellent masking capabilities. It helps in easy and predictable clinical procedure. Procera Bridge Alumina, world's only bridge in densely sintered alumina, provides excellent looks and easy cementation. It's a multitasking wonder. Experience it.

     

    Procera Laminate

    • Strongest Laminate
    • Excellent masking capabilities
    • Easy and predictable clinical procedure

     

    Procera Bridge Alumina

    • World's first and only bridge in densely sintered alumina
    • Excellent aesthetics
    • Easy conventional cementation

     

    Procera Bridge Zirconia

    • Gives marginal fit of less than 15 microns and spans up to 60 mm in length

  • Terms and Conditions

    • Warranty regarding extension, retention, occlusion, contact etc. is only on the basis of the given model.
    • All repetitions and corrections should be informed within 7 days and will be accepted only with fresh models along with initially supplied model, work and warranty card.
    • To claim warranty for DentCare prostheses, the patient should consult the same doctor or clinic, not the Lab directly Repetitions will be charged at 50% of the actual rate of the work and additional tax, if any. Patient cannot claim warranty for any sort of prostheses upgradation.
    • Products described without warranty in the price list will not have any warranty.
    • By delivering DentCare prostheses to the patient the dentist approves and takes responsibility that all clinical requirements are fulfilled.
    • Payment through at par cheque / DD should be made against delivery.
    • Ensure giving temporary crown / bridge, after tooth preparation. We won't be responsible for problems in insertion, if temporary crown or bridge is not given.
    • An order placed, cannot be withdrawn.
    • We need 7 working days to complete a work excluding Second Saturdays, Sundays and other Holidays.
    • Prices are inclusive of GST.
    • Prices are subject to change without prior information.
    • All legal disputes shall be within Muvattupuzha jurisdiction.

    URGENT ORDERS

    Urgent orders will be charged 10% extra. The fabrication time depends on prosthesis type and number of units. (For more details please refer time schedule)

    SUGGESTIONS

    • The proximal margins of the abutments should be parallel or slightly tapering towards occlusal surface. Eliminate undercuts to the maximum. Round all corners.
    • "We always prefer perfect rubber base impression". Don’t pour die stone type IV immediately to the rubber base impression. Pour only after 1 hour.
    • Don't allow the alginate impression to get dried. Pour Die Stone type IV immediately. If the model thus prepared is found defective (air bubble, broken stump etc.), discard it, and take a new impression rather than trying to produce a second model from the old alginate impression. We need upper and lower full arch Die Stone type IV models to check the occlusion correctly.
    • Provide bite registration in Silicone putty (not in wax), if necessary.
    • The shade will be perfect only if the labial and occlusal clearance is 2mm and the shade should be taken in natural light.
    • VITA classical or VITA 3D master or Ivoclar A-D shade number should be given for ceramic shade selection.
    • Avoid grinding the metal prosthesis at the time of metal trial.
    • This may lead to contamination of metal and ceramic chip- off. Always provide pre-operative model for anterior cases, if the patient is satisfied with the temporary crown/ bridge, kindly provide a model of that, which will help us in imitating the shape and arrangement.
    • Pre-operative model will also be useful in some cases.

All Products

DentCare is an Indian company with international standards.

  • DentCare Zirconia

  • DentCare Luminers

  • PEEK

  • DMLS CAD/CAM PFM

  • Light Cure Composite

  • Valplast

  • Implant C & B

  • DentCare Hybrid Implant Bridge

  • Implant-supported Overdentures

  • Acrylic Full Denture

  • Digital Smile Design

  • Lava 3M ESPE

  • Cercon (Degudant)

  • IPS e.max

  • Zenostar

  • Procera (Nobel Biocare)

  • DentCare Flex

  • Biofunctional Prosthetic System(BPS) Dentures

  • Precision Attachment

  • CoCr&Ti Cast Partial Dentures

  • Hybrid Denture

  • Surgical Drill Guide

  • DentCare Nova

  • Precious Alloy-Full Metal Crowns

  • DentCare Anti-Snoring Device

  • DentCare Mouth-Guard Triple

  • Night Guard

  • Bio Dentaplast

  • e.max CAD